American football jerseys
are custom-made to distinguish between quality when shopping for three products. We choose the lowest price for products of similar quality. However, if the quality is not compared, the price of the selected American football jersey is very poor. On the one hand, the company grade is lowered, and on the other hand, the employees are not comfortable enough. How to distinguish the quality of the American football jersey?
First, the appearance of the American football jersey. American football jerseys should be neat, flat, symmetrical, folded and straight, all parts are ironed flat, no leakage, no dead pleats, product wireless head, no yarn. The line is compatible with the fabric, including color, texture, fastness, shrinkage, etc., and the two should be roughly the same to ensure the intrinsic quality and appearance quality of the garment. The color of the button should match the color of the fabric.
Second, the size of the American football jersey. The clothing model setting must be carried out in accordance with the relevant provisions of the “clothing model series” standard. Specifications are limited to the tolerances allowed by the standard.
Third, the color difference of the American football jersey. Chromatic aberration is a requirement for American football jersey fabrics. According to the national standard for the chromatic aberration, the upper collar of the garment, the fabric of the bag, and the side seam of the trousers are the main parts, the color difference is higher than the fourth grade, and the other surface parts are four grades. The color difference test of the American football jersey is to use the "dye fastness fading sample card". The sample card is one of the national standards established by the former Ministry of Textile Industry. The sample card consists of five pairs of gray standards and is divided into five levels. The five-level fading fastness is the best, the color difference is equal to zero, and the fourth-level to the first-level is the degree of fading relatively increasing, and the first level is the most serious.
Fourth, the flaws of the American football jersey. The standard stipulates that only one point is allowed for each individual part. That is to say, there are defects on the piece of clothing, and there is no need to make any more defects on the patch pockets and the flaps in this separate part. The type of defects varies with different fabrics. The judgment shall be carried out in accordance with the standard regulations. The independent part is the area divided by the piece, and the main part of the piece is divided into four areas of 1, 2, 3, and 4. Each part is an area on the piece of clothing.
Fifth, the sewing of American football jerseys. The stitch length of the bright line (including the dark line without the open line) is specified in the stitch pitch density, 14-18 stitches per 75px. There are many varieties of fabrics. To ensure the appearance and firmness of the products, different fabrics should be selected with different stitch lengths. For example, the stitch length of a hard fabric can be thinner, and the stitch width of a soft fabric can be made a little dense. The line of the sewing part is not allowed to bend freely. It must meet the needs of the shape of the American football jersey; the lines should be neat, do not overlap, no jump stitches, throwing lines, clear stitches, and the stitches should be firm and secure. The length of the wire should be suitable, without the phenomenon of missing needles and off-line, and the tightness of the stitching should be compatible with the thickness and texture of the fabric.American football jersey direct sales manufacturers